Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
©
2010
US
Page 8
Mill Drill
BF 30 Vario
Version 1.0.6
27 / 08 / 2010
WARNING!
The mill drill may only be used with the safety devices activated.
Disconnect the mill drill from the electrical power whenever you detect a failure in the
safety devices or when they are not fitted!
All additional installations carried out by the operator need to incorporate the prescribed
safety devices.
As the machine operator, this will be your responsibility!
„Safety measures during operation“ on page 8
1.4
Qualification of personnel
1.4.1
Target group
This manual is addressed to
the operator,
the user,
the maintenance staff.
The warning notes therefore refer to both operation and maintenance of the mill drill.
Always disconnect the mill drill plug from the electrical power. This will prevent it being used by
unauthorised staff.
INFORMATION
All personnel involved in assembly, commissioning, operation and maintenance need to
be duly qualified,
strictly follow this operating manual .
In the event of improper use
there may be a risk to the staff,
there may be a risk to the mill drill and other material property,
may affect proper operation of the mill drill.
1.5
Safety measures during operation
CAUTION!
Risk due to inhaling health hazardous dusts and mist.
Depending on the material being processed and any additional dusts and mist in the
work area, conditions might impair your health.
Make sure that the generated health hazardous dusts and mist are safely removed at the
point of origin and are collected and/ or filtered from the working area. Use an appropri-
ate dust collection/ filter unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Take additional preventive measures in order to safely avoid health hazards before pro-
cessing flammable materials (e.g. aluminum, magnesium) or before using flammable
additives (e.g. solvents).
