Maintenance
OPTIMUM
M A S C H I N E N - G E R M A N Y
©
2010
US
Page 34
Mill Drill
BF 30 Vario
Version 1.0.6
Stand 27 / 08 / 2010
first after 200
operating
hours, then
every 2000
operating
hours
Gearbo
x mil
ling
h
ead
Oil change
For the oil change use an appropriate collecting basin with
appropriate capacity.
Have the mill drill run for a few minutes, the oil will heat up
and will slightly penetrate from the opening.
Remove the ventilation screw from the gear.
Remove the oil drain plug.
Refill the oil over the removed ventilation screw.
Quantity and type of oil
„Operating material“ on page 15
Fig.5-3: Mill head
Interval
Where?
What?
How?
Oil drain plug
Ventilation screw of the gear
