OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
©
201
0
US
Page 11
27 / 08 / 2010
Version 1.0.6
BF 30 Vario
Mill Drill
1.6.4
Separating protective equipment
Adjust the protective guard equipment to
the correct height before you start work-
ing.
To do so, detach the clamping screw,
adjust the required height and retighten
the clamping screw.
A switch is integrated in the fixture of the
spindle protection which monitors that the
cover is closed.
INFORMATION
YOU CANNOT START THE MACHINE IF
THE PROTECTIVE GUARD IS NOT
CLOSED.
Fig. 1-4: Separating protective equipment
1.7
Safety check
Check the mill drill regularly.
Check all safety advices
at the beginning of each shift,
once a week (with the machine in operation),
after every maintenance and repair operation.
Locking screw
General check
Equipment
Check
OK
Protective covers
Fitted, firmly bolted and not damaged
Labels,
markings
Installed and legible
Run test
Equipment
Check
OK
EMERGENCY-STOP but-
ton
When the EMERGENCY-STOP button is activated, the mill drill
should switch off. A restart will not be possible until the EMER-
GENCY-STOP button has been unlocked and the ON switch has
been activated.
Separating protective
equipment around the
drilling and milling spindle
Only switch on the mill drill if the protective equipment is closed.
