HiScan Touch
Installation and Operation Manual
OPTIKON 2000
Code 14101XEN
8-16
2014-09-02 Rev.B
8.4 USING THE DEVICE
After start-up, the device can be used without configuring specific settings.
ATTENTION
•
The use of some programs (like antivirus programs running
continuously) with HiScan may influence the performance of the device
(significantly reducing for example the scanning rate).
8.4.1. GENERAL INSTRUCTIONS
1) Select the desired operating mode from the main menu (Bscan, Biometry,
etc.).
2) Select the operator's name by selecting Operator on the display.
3) Select the operator's name.
a. If the patient already exists, use the tree in the right pane of the
screen.
i. Left click symbol (+) in the left pane of the tree.
ii. Click the patient's name
to select the patient
as
current one.
iii. Click (+) on the left of the name, then click (+) on the left of
the date to display the list of images.
iv. Click an image number to select it (BSCAN displays).
b. If the patient is new, select New Patient. The corresponding window
displays.
i. Enter the surname, name and any other desired data, then
touch SAVE and use the mouse cursor to move to the
subsequent fields. Press SAVE or Cancel.
ii. Current Database displays in the pane.
iii. A new patient can be saved only after the name an
surname have been entered.
