Opengear IP-KVM 1001, Руководство пользователя, Страница: 84 / 109

KVM over IP User Manual Page 84 of 109
Modem Init String
The initialization string used by the IP-KVM to initialize the modem. The default value
will work with all modern standard modems directly connected to a telephone line.
In case you have a special modem or the modem is connected to a local telephone
switch that requires a special dial sequence in order to establish a connection to the
public telephone network, you can change this setting by giving a new string. (Refer
to the modem's manual about the AT command syntax.)
Modem server IP address
This IP address will be assigned to the IP-KVM itself during the PPP handshake. Since
it is a point-to-point IP connection virtually every IP address is possible but you must
make sure, it is not interfering with the IP settings of the IP-KVM and your console
computer. The default value will work in most cases.
Modem client IP address
This IP address will be assigned to your console computer during the PPP handshake.
Since it is a point-to-point IP connection virtually every IP address is possible but you
must make sure, it is not interfering with the IP settings of the IP-KVM and your
console computer. The default value will work in most cases.
Pass-through access to serial port via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port and access it
(assuming it provides terminal support) via Telnet. Select the appropriate options for the serial
port and use the Telnet Console or a standard Telnet client to connect to the IP-KVM.
5.5.6 Date / Time
Important events like a login failure or a firmware update are logged to a selection of logging
destinations. Each of those events belongs to an event group, which can be activated separately.
This link enables you to set up the internal real-time clock of the IP-KVM. You have the possibility
to adjust the clock manually, or to use a NTP timeserver: