Opengear IP-KVM 1001 Скачать руководство пользователя страница 51

Страница: 51 / 109

KVM over IP User Manual

Page 51 of 109

Click

Virtual Media

and select

Virtual Drive

Click

Apply

to submit your changes

Figure 5-4 USB mass storage option

If unset, and no file image will be found it may happen that the host system will hang on boot

due to changes in the boot order, or the boot manager (LILO, GRUB). This case was reported for

some Windows versions (2000, XP), other OS might not be fully excluded. This behavior

depends on the BIOS version used in that machine.

5.2.3

CD/DVD Image

To use an image on Windows share (via SAMBA)

click

Virtual Media

and select

Virtual Drive

select

CD/DVD Image

from the submenu

Figure 5-5 Virtual Media - CD-ROM Image

Share host

The server name or its IP address (the PC that shares out the image file). On

Windows 95, 98 and Windows ME do not specify the IP address but the server name

Содержание IP-KVM 1001














































































































Результаты поиска

Содержание IP-KVM 1001

Отзывы:

Opengear IP-KVM 1001, Руководство пользователя, Страница: 51 / 109

Результаты поиска

Содержание IP-KVM 1001

Отзывы: