Opengear IP-KVM 1001 Скачать руководство пользователя страница 30

Страница: 30 / 109

KVM over IP User Manual

Page 30 of 109

super

and the default password

pass

When connecting to the IPK-KVM unit, the IPK-KVM system (web server, Telnet server or SSH

server) will prompt user to enter the user name and password in order to access to the system.

If this is the first time logging in, log in with the factory default username and password, you will

be prompted to change the default password.

ake sure to change the super user password immediately after you have

installed and accessed your IP-KVM for the first time. Not changing this
password for the super user is a severe security risk and might result in
unauthorized access to the IP-KVM and to the host

system

Having logged into the IP-KVM successfully, the main page of the IP-KVM appears. This page

consists of three parts:

The buttons on the left hand side which allow you to navigate within the front end

Содержание IP-KVM 1001














































































































Результаты поиска

Содержание IP-KVM 1001

Отзывы:

Opengear IP-KVM 1001, Руководство пользователя, Страница: 30 / 109

Результаты поиска

Содержание IP-KVM 1001

Отзывы: