Opengear IP-KVM 1001, Руководство пользователя, Страница: 73 / 109

KVM over IP User Manual Page 73 of 109
IP auto configuration With this option you can control if the IP-KVM should fetch its
network settings from a DHCP or BOOTP server. For DHCP, select “dhcp” , and for
BOOTP select “bootp” accordingly. If you choose “none” then IP auto configuration
is disabled
Preferred host name
Preferred host name to request from DHCP server. Whether
the DHCP server takes the IP-KVM suggestion into account or not depends on the
server configuration
IP address IP address in the usual dot notation
Subnet Mask The net mask of the local network
Gateway IP address
In case the IP-KVM should be accessible from networks other
than the local one, this IP address must be set to the local network router's IP
address
Primary DNS Server IP Address IP address of the primary Domain Name Server in
dot notation. This option may be left empty, however the IP-KVM will not be able to
perform name resolution
Secondary DNS Server IP Address IP address of the secondary Domain Name Server
in dot notation. It will be used in case the Primary DNS Server cannot be contacted
Under Network Basic Settings you can set the ports that are to be used by the various
TCP/IP services
Figure 5-16 Network Settings
Remote Console and HTTPS port Port number at which the IP-KVM's Remote