One Stop Systems, Inc. OSS-wanPCI-CxT1E1 User Manual
Rev. A
3
Installation and Removal
1. Power down the host system.
2. Open the chassis according to your system documentation.
3. Let the power supply cool down, if necessary.
4. Remove the OSS-wanPCI-CxT1E1from the protective bag, observing proper ESD safety procedures.
Installing
the OSS-wanPCI-CxT1E1:
1. Insert the OSS-wanPCI-CxT1E1 an open PCI slot. The adapter is a universal-keyed 32 bit board.
2. Make sure that the adapter is well seated and tighten the screw.
3. Close the chassis according to your system documentation
4. Attach the cable. Use an 8-position modular (RJ-48) straight-throughpatch cord to make the connection between the RJ-48
jack on the adapter and the RJ-48 jack in your wall or test system.
5. Turn on power to the computer. Adapter installation is complete.
6. Reverse the above procedure to remove the board
Specifications
Electrical/Mechanical Specifications
Form Factor:
32-bit 33Mhz PCI 2.1 or PCI 2.2 Universal Key [5V or 3.3V]
Dimensions (H x L):
4.2 x 5.5 inches (106.7 x 139.7 mm)
Front Panel Connectors:
1,2 or 4 RJ48 connectors
Front Panel Indicators:
RAI and AIS LEDs om RJ48 conectors, Power LED
Operating Environment (designed to meet the following conditions)
Temperature Range:
-5° to 55°C (23° to 136°F)
Relative Humidity:
20 to 80% non-condensing
Shock:
30g acceleration peak (11ms pulse)
Vibration:
5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration.
Agency Compliance Designed to meet, but not tested
Pending
MTBF (Telecordia TR-332 Version 6)
395,000
hours
