One Stop Systems EB3T-V3 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 74

background image

One Stop Systems

ExpressBox 3T-V3 | 63

PICTURE 10

7.2 Step 2: Install GPU

1.

Prior to installing the GPU make sure the power cable and Thunderbolt cable are disconnected.

2.

Connect the aux power to the GPU

3.

Plug in the GPU in slot#2 or slot#3. Do not use the slot#3. This is a closed-ended PCIE slot connector, the GPU will not fit in slot#2.
Any PCIe cards physically larger than x8 will not fit in slot#3.

4.

Turn ON the host computer first without connecting the Thunderbolt device.

5.

Connect power cable to Thunderbolt device (EB3T-V3)

6.

Connect Thunderbolt cable to EB3T-V3

7.

Connect the other end of Thunderbolt cable to Host computer

8.

The GPU will be detected.

7.3 Step 3: Install GPU Software

9.

Install the software for the GPU, see

Quadro eGPU Driver Installation Guide

.

10.

When done installing the eGPU software, shutdown the host computer completely.

11.

Disconnect the Thunderbolt cable from EB3T-V3 unit.

12.

Turn ON the host computer without connecting the Thunderbolt device.

13.

After the host computer has started UP, reconnect the Thunderbolt cable to EB3T-V3

14.

Your external Thunderbolt3 device and eGPU should be detected.

7.4 Quadro GPU Driver Installation Guide

A Quadro eGPU solution consist of a PCIE based Quadro graphics card hosted in an external enclosure/box, connected to a host
laptop/desktop system through Thunderbolt 3 interface.

For the host system, users are recommended to use TB3 certified host systems. The complete list of systems is available here

https://thunderbolttechnology.net/products

Connect eGPU enclosure to the host system following the guidelines provided by the manufacturer of the external enclosure.

Quadro eGPU solutions is only enabled on Windows 10 Operating Systems. Please follow the below guidelines for the Quadro eGPU driver
installation

1.

Host system has a non NVIDIA Graphics (integrated graphics or AMD Discrete graphics):

When Quadro eGPU is connected to an

intel/amd integrated graphics or AMD discrete GPU system,
Download and install Quadro driver 385.12 or newer. Driver available for download here -

http://www.nvidia.com/Download/index.aspx?lang=en-us

«
...
61
62
63
64
65
...
»

Содержание EB3T-V3











































































Отзывы:

Нет отзывов

Похожие инструкции для EB3T-V3

Бренд: YASKAWA Страницы: 34

Бренд: Lanner Страницы: 63

AIE900-XNX Series

Бренд: AXIOMTEK Страницы: 53

Teranex 2D Processor

Бренд: Blackmagicdesign Страницы: 969

Бренд: Eaton Страницы: 14

Бренд: axing Страницы: 4

Бренд: ebm-papst Страницы: 13

Бренд: Microchip Technology Страницы: 9

Бренд: S&T Страницы: 28

Бренд: SilverStone Страницы: 28

Бренд: Kaya Instruments Страницы: 48

Бренд: Mod Страницы: 11

Бренд: M86 Security Страницы: 512

Бренд: Matrix Switch Corporation Страницы: 48

Бренд: MACHINIST Страницы: 15

Бренд: peplink Страницы: 111

Бренд: SeaLevel Страницы: 25

Бренд: MTL Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды