ON Semiconductor KAI-2093, Руководство пользователя

Страница: 11 / 25

EVBUM2277/D
http://onsemi.com
11
Register 8: Frame Tables
Several Frame Tables are written by default to the
KSC−1000 Frame Table registers, but only one Frame Table
is active at one time, as determined by the Frame Table
Pointer (Register 0). Frame Table 0 is used for
Free-Running Single Channel and Dual Channel modes, and
Frame Table 1 is used for Single Channel 2
×
2 Binning
mode. Note that the last row in Table 18 and Table 19 are the
mnemonics associated with the Flag, Count, and Address
bits. See the KSC−1000 Device Specification (
References )
for more details.
Table 18. FRAME TABLE 0 DEFAULT SETTING
Bit Location Frame Table Data
FT0 Entry
0 1 2 3
0 Check and Increment Line Counter 1 0 0 0
1 Clear Line Counter 0 1 1 1
2 Force INTG_STRT 0 0 0 0
3:4 Horizontal Binning Factor 0 0 0 0
5 HCLK_V Enable 0 0 0 0
6 LINE_VALID Enable 1 0 0 0
7 FRAME_VALID Enable 1 0 0 0
8 Video Amplifier Enable 0 0 0 0
9 AFE Clock Enable 1 1 1 1
10 CLPDM2 Enable 0 0 0 0
11 CLPDM1 Enable 1 0 0 0
12 CLPOB2 Enable 0 0 0 0
13 CLPOB1 Enable 1 0 0 0
14 PBLK Enable 1 0 0 0
15 Pblk_Idle_Val 1 1 1 1
16 Flag 0 1 0 0
17:29 Count 1104 0 1 0
30:32 Address 2:0 0 4 1 0
33 Address 3 0 0 0 0
− Mnemonic ELT0 ExLTNVD 4 ELT 1 JMPFT 0
Table 19. FRAME TABLE 1 DEFAULT SETTING
Bit Location Frame Table Data
FT1 Entry
0 1 2 3
0 Check and Increment Line Counter 1 0 0 0
1
Clear Line Counter 0 1 1 1
2 Force INTG_STRT 0 0 0 0
3:4 Horizontal Binning Factor 1 0 0 0
5 HCLK_V Enable 0 1 0 0
6 LINE_VALID Enable 1 0 0 0
7 FRAME_VALID Enable 1 0 0 0
8 Video Amplifier Enable 0 0 0 0
9 AFE Clock Enable 1 1 1 1
10 CLPDM2 Enable 0 0 0 0
11 CLPDM1 Enable 1 0 0 0
12 CLPOB2 Enable 0 0 0 0