STAND: 17.06.2019
9910_Operation_Manual_STANDCONTROL_C1_Rev1v1_EN
Seite 9 von 41
Danger:
Under no circumstances may the connecting cable, the power cord or parts
of the controller or other electronic components be immersed in liquids. Please keep
the connecting cable away from heated surfaces.
3.4.2 Safety instructions for resellers
We consider resellers companies that purchase the STAND.CONTROL C1 from Oelschläger
Metalltechnik
GmbH and that resell it as their own product after adding a table surface.
Note:
For reasons of EU conformity and product safety, we recommend that the users
provide their products with operating instructions in the respective official EU language.
Warning
: Be sure to enclose operating instructions in your finished product that include
all safety instructions required by the consumer for the safe handling of your product.
Note:
The operating instructions for your finished product must include the following
warning: You must read these operating instructions before you start using the product.
Point out to your consumer that the operating instructions must be kept near the
product.
Danger:
It is mandatory that you put your product through a risk analysis so that
you can react to any possible residual hazards (e.g. through structural measures or
warnings in the operating instructions and/or safety instructions on your product).
Warning:
Make sure that no unauthorised persons (small children, persons under
the influence of medication, etc.) handle your product or the STAND.CONTROL C1.
3.5 Repairs
Attention
: In the interest of preventing malfunctions, only authorised service
personnel are permitted to make any repairs.
Attention:
Opening any components of this desk base produces risks for the
following malfunctions.
Danger:
If the controller is opened, danger of an electrical shock exists for an
extended period of time, even after disconnection from the power supply.
In case of a technical defect in the STAND.CONTROL C1, please contact the customer service
department of Oelschläger
Metalltechnik
GmbH. Solutions for easy-to-rectify malfunctions are pro-
vided in Section 12.
