STAND: 17.06.2019
9910_Operation_Manual_STANDCONTROL_C1_Rev1v1_EN
Seite 7 von 41
Warning of injuries caused by crushing.
Not heeding these instructions can result in harm to health, life-threatening injuries
and damage to property!
Warning of damage from electrostatic discharge (ESD).
Points to important information that must be heeded for safe operation of the
described product.
Note on the obligation to read the operating instructions.
Note to pull the power cord before the next action.
3.4 Safety Instructions
This operating manual contains safety instructions that inform you about potential hazards and thus
facilitate safe operation of the STAND.CONTROL C1. Please be sure you comply with these safety
instructions without fail!
This section provides you with general safety instructions that do not refer to any
specific work step. You can find the job-specific safety instructions in the respective section of the
operating instructions.
3.4.1 General safety instructions
Note:
Please read and take note of, without fail, the operating manual before
assembly/commissioning of the table controller STAND.CONTROL C1.
Danger:
Never open the motor control unit STAND.CONTROL C1 under any
circumstances. There is a danger of an electric shock.
Danger:
The table controller STAND.CONTROL C1 is not designed for continuous
operation. The desktop height can be adjusted without interruption for no longer
than the powering-on time indicated on the type plate.
Warning:
The STAND.CONTROL C1 motor controller must only be operated with
the mains voltage specified on the rating plate!
Before commissioning, ascertain whether the mains voltage is within the acceptable
range as given on the rating plate of the motor controller.
Danger:
This unit can be used by children aged 8 years and above and by persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge, if they are supervised or instructed in the safe use of the device and
understand the resulting risks.
