STAND: 17.06.2019
9910_Operation_Manual_STANDCONTROL_C1_Rev1v1_EN
Seite 24 von 41
10 Configuration-dependent functions
10.1 Comfort hand switch
Oelschläger
Metalltechnik
GmbH offers its customers various types of hand switches with a display.
As a result, the appearance, the display, or the buttons can vary from the model in the illustration. All
of our hand-switch models are available with and without a printed logo. The functions that have been
described can be executed with all these comfort hand switches and are described with the help of the
model STAND.MOVE M1.1. There is a detailed description of the hand switch functions in the relevant
operating manual of the respective manual switch.
If you have any other questions, please get in touch with Customer Service.
Figure 8: Hand switch STAND.MOVE M1.1.
This manual switch is additionally equipped with a display for showing the current desk height in
centimetres (CM) or inches (Inch). Data on the status of the table and error messages are shown in
the display. If the hand switch is not operated for a prolonged period, the display goes off provided
there is no error being shown currently. Pressing any button switches the display on again.
With the arrow keys ( and ), the table can be moved similarly to the simple hand switch (see sec-
tion 9.1).
10.1.1 Saving positions
The STAND.CONTROL C1 controller provides the user the facility to save up to four heights. This
function can only be used with a comfort hand switch. The positions are saved in the controller and are
retained even when the hand switch is replaced.
To save a position, proceed as follows:
1. Move the table, using the arrow keys ( and ), to the desired height.
2. Press the “Logo” button below the display.
3. A
will appear in the display.
4. Press the position key (keys 1 – 4), to which you wish to save the position.
5. The selected position is shown in the display (for example
).
The current height is now ready to be retrieved using this position button. After approx. 2 seconds, the
display toggles automatically and once again displays the current height. In this manner, a height can
be assigned to every position button.
The saved positions cannot be deleted.
A saved position can be overwritten.
