Omron V750 series, Руководство по подключению к сети

Страница: 37 / 78

9. Program
9.2. Destination Device Command
This section explains the destination device command used in this program.
9.2.1. Overview of the Command
This program uses “GETR TYP FWV (read the product type and firmware version of the
memory data) command” to read the information of the destination device.
Command Description
GETR Read the Reader/Writer settings.
Additional Information
For details, refer to
Section 5 Command Line Interface
in the
V750-series UHF RFID System
User’s Manual
(Cat. No. Z235).
9.2.2. Detailed Description of the Command
This section explains the formats used to read the information on the destination device by
executing the GETR TYP FWV (read the product type and firmware version of the memory
data) command.
● Command format of the send message
This is the command format of the message that is sent by the Controller to the destination
device according to the setting of the GETR TYP FWV (read the product type and firmware
version of the memory data) command.
•ASCII codes are sent except for the header and terminator.
Data Number of bytes Remarks
Command code 4 Fixed: ”GETR”
(Space *1) 1 Fixed: ” ” (Space)
(Parameter and
option *1) 1 and greater
*2
Fixed: ”typ” (product type) + ”+”fwv” (firmware
version)
Terminator 1 Fixed: [LF](16#0A)
*1: When this is not used, the terminator is moved forward.
*2: Any number of bytes can be set for parameters and 3 bytes for options.
34