Omron V750 series, Руководство по подключению к сети

Страница: 12 / 78

6. Ethernet Communications Settings
6. Ethernet Communications Settings
This section describes the specifications such as communication parameters and variables
that are set in this document.
Additional Information
To perform communications without using the settings described in this section, you need to
modify the program. For information on the program, refer to
Section 9. Program
.
6.1. Ethernet Communications Settings
The settings required for Ethernet communications are shown below.
6.1.1. Communications Settings between the Personal Computer and the RFID
Reader/Writer
The setting example below is used to explain the procedure for setting the RFID
Reader/Writer by using the personal computer.
Setting item Personal computer used for setting RFID Reader/Writer
IP address 192.168.1.1 192.168.1.200 (Default)
Subnet mask 255.255.255.0 255.255.255.0 (Default)
Gateway ---.---.---.--- 192.168.1.254 (Default)
*In this document, the gateway setting is unnecessary because the connection is made in
the same segment.
6.1.2. Communications Settings between the Controller and the RFID
Reader/Writer
The setting example below is used to explain the procedure for connecting the Controller to
the RFID Reader/Writer.
Setting item NJ501-1500 RFID Reader/Writer
IP address 192.168.250.1 192.168.250.2
Subnet mask 255.255.255.0 255.255.255.0 (Default)
Gateway -.-.-.- 192.168.1.254 (Default)
Host name - “V750-BA50C04-US” (Default)
Domain name - Blank (Default)
DHCP - OFF (Default)
TCP/IP port (This is set by the program.) 7090 (Default)
*In this document, the gateway setting is unnecessary because the connection is made in
the same segment.
*This project file uses the default settings (keep-alive: use, linger option: Do not use) of the
keep-alive and linger option functions for the TCP socket communications. Use these
functions according to the system when necessary.
9