Omron V750 series, Руководство по подключению к сети

Страница: 21 / 78

7. Connection Procedure
7.3. Setting Up the Controller
Set up the Controller.
7.3.1. Starting the Sysmac Studio and Importing the Project File
Start the Sysmac Studio and import the project file.
Install the Sysmac Studio and USB driver beforehand.
1
Confirm that the personal
computer is connected to the
Controller through a USB cable,
and turn ON the power supply to
the Controller.
Start the Sysmac Studio and
click the
Import
Button.
*If a confirmation dialog for an
access right is displayed at
start, select to start.
2
The Import File Dialog Box is
displayed. Select
OMRON_V750_ETN(TCP)_EV
101.smc and click the
Open
Button.
*Obtain the project file from
OMRON.
3
OMRON_V750_ETN(TCP)_EV
101 project is displayed.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
*If an error dialog box is
displayed, check the version of
the Sysmac Studio.
Multiview
Explorer Edit Pane Edit Pane Toolbox
18