Omron V750 series, Руководство по подключению к сети

Страница: 27 / 78

7. Connection Procedure
10
The Synchronization Dialog Box
is displayed.
Confirm that the data to transfer
(NJ501 in the right figure) is
selected. Then, click the
Transfer to Controller
Button.
*After executing the
Transfer to
Controller
, the Sysmac Studio
project data is transferred to the
Controller and the data are
compared.
11
A confirmation dialog is
displayed. Click the
Yes
Button.
A screen stating "Synchronizing"
is displayed.
A confirmation dialog box is
displayed. Click the
Yes
Button.
12
Confirm that the synchronized
data is displayed with the color
specified by “Synchronized” and
that a message is displayed
stating "The synchronization
process successfully finished".
If there is no problem, click the
Close
Button.
*A message stating "The
synchronization process
successfully finished" means
that the project data of Sysmac
Studio and that of the Controller
match.
*If the synchronization fails,
check the wiring and repeat the
procedure described in this
section.
24