Omron V750 series, Руководство по подключению к сети

Страница: 24 / 78

7. Connection Procedure
7.3.3. Going Online and Transferring the Project Data
Connect online with the Sysmac Studio and transfer the project data to the Controller.
Always confirm safety at the destination node before you transfer a user
program, configuration data, setup data, device variables, or values in memory
used for CJ-series Units from the Sysmac Studio.
The devices or machines may perform unexpected operation regardless of the
operating mode of the CPU Unit.
1
Select
Change Device
from the
Controller Menu.
2
The Change Device Dialog Box
is displayed.
Confirm that the Device and
Version are set as shown on the
right and click the
OK
Button.
*If the settings are different from
the above, change the values
from the pull-down list.
3
If settings were changed in step
2, the Build Dialog Box is
displayed. Click the
Yes
Button.
*This dialog box is not displayed
if no change was made.
4
Select
Communications Setup
from the Controller Menu.
21