Omron V750 series, Руководство по подключению к сети

Страница: 28 / 78

7. Connection Procedure
7.4. Connection Status Check
Execute the program and confirm that Ethernet communications are normally performed.
Sufficiently confirm safety before you change the values of variables on a Watch
Tab Page when the Sysmac Studio is online with the CPU Unit. Incorrect
operation may cause the devices that are connected to Output Units to operate
regardless of the operating mode of the Controller.
Precautions for Correct Use
Please confirm that the LAN cable is connected before proceeding to the following steps.
If it is not connected, turn OFF the power to the devices, and then connect the LAN cable.
7.4.1. Executing the Program and Checking the Receive Data
Execute the program and confirm that the correct data are written to the variables of the
Controller.
25
1
Confirm that RUN mode is
displayed on the Controller
Status Pane of the Sysmac
Studio.
If PROGRAM mode is shown,
select
Mode
-
RUN Mode
from
the Controller Menu.
A confirmation dialog box is
displayed. Click the
Yes
Button.
2
Select
Watch Tab Page
from the
View Menu.
3
The Watch Tab Page 1 is