Omron SYSMAC-SE2, Руководство по практике

Страница: 50 / 54

Precautions for Correct Use
To import a CJ-series Unit configuration, you need to set this as follows.
• Set slot numbers so that they do not conflict in the Expansion Rack configuration.
• Set slot numbers so that they are sequential numbers that start from 0.
• Set slot numbers so that they are not more than the maximum unit number of the CPU Rack
for NJ-series CPU Units.
3-3-5
Device Variables
Set the component data for models that support the connector function for device variables as follows.

PLC Connection Points
Set the target I/O ports as follows.
ID Property name Setting value
20402 Symbolic address Device variable name
20011 Function text Device variable comment
Precautions for Correct Use
• To enter a device variable comment, you need to set the device variable name.
• Set device variable names so that they do not conflict in the controller configuration. Device
variables with conflicting variable names will not be imported.
• When ID: 20438 Deactivated I/O connection point is selected, device variables will not be im-
ported to the Sysmac Studio even if their device variable names and device variable com-
ments are entered.
3-3-6
Power Supply Units

PLC Box
Leave all the setting values of the PLC box blank.
ID Property name Setting value
20161 Configuration project Blank
20408 Station ID Blank
20427 Rack ID Blank
20410 PLC card is placed on rack ID Blank
20411 Position (slot / module) Blank
20253 1 CPU: Name [1] Blank
3 Setting EPLAN Electric P8
3-14
Sysmac Studio Electrical CAD Connector Function Practices Guide for AutomationML Import (EPLAN Electric P8) (P156)