2-2
Preconditions for the Sysmac Studio/
EPLAN Electric P8 Connector Func-
tion
This section describes the preconditions for using the connector function and the preconditions for im-
porting the target data.
Additional Information
Refer to the
Sysmac Studio Version 1 Operation Manual (Cat. No. W504)
for the conditions for
the Sysmac Studio to import data.
2-2-1
Preconditions for Using the Connector Function
All of the following conditions must be met to use the connector function.
• In an EPLAN Electric P8 project, the CPU Unit is supported by the connector function. Refer to
on page 2-2 for the CPU Unit models supported by the connector function.
• In the EPLAN Electric P8 project, the component data and project settings for the CPU Unit meet
the conditions of the property setting values described in
• There is only one CPU Unit in the data to export from EPLAN Electric P8 to the AML file.
2-2-2
Preconditions for Importing Target Data
This section describes the import preconditions for target items in a
controller configuration
and
device
variables
.
Preconditions for Importing EtherCAT Slaves
All of the following conditions must be met to import EtherCAT slaves in the Sysmac Studio.
• In an EPLAN Electric P8 project, the EtherCAT slaves are supported by the connector function. Re-
on page 2-2 for the EtherCAT slave models supported by the connec-
tor function.
• In the EPLAN Electric P8 project, the component data and project settings for the EtherCAT slaves
meet the rules described in
on page 3-3 and
Preconditions for Importing an NX Unit Configuration
All of the following conditions must be met to import an NX Unit configuration with the Sysmac Studio.
• In an EPLAN Electric P8 project, the NX Unit configuration consists of only Units supported by the
on page 2-4 for the NX Unit models supported by the
connector function.
• In the EPLAN Electric P8 project, the component data and project settings for the NX Units meet the
2 Target Data and Preconditions for the Sysmac Studio/EPLAN Electric P8 Connector Function
2-8
Sysmac Studio Electrical CAD Connector Function Practices Guide for AutomationML Import (EPLAN Electric P8) (P156)
Содержание SYSMAC-SE2
Страница 53: ......
