Omron SYSMAC-SE2, Руководство по практике

Страница: 45 / 54

EtherCAT Slaves (Excluding Six-port Junction Slaves)

PLC Box
Set the PLC box as follows.
ID Property name Setting value
20161 Configuration project Same value as "Configuration project" of the CPU Unit
20408 Station ID Any name in a format that meets the EPLAN specification con-
straints and is different from "Station ID" of other component
data
20253 1 CPU: Name [1] Same value as "CPU: Name [1]" of the CPU Unit
20418 Version Revision of the EtherCAT slave (This must be a version that
exists in the Sysmac Studio and a single-byte number that con-
tains periods as the delimiter.)
If blank, the component data will be imported with the latest
version.

Bus Ports (EtherCAT Ports)
Set EtherCAT ports (input ports) as follows.
ID Property name Setting value
20311 Physical network: Bus ID /
item number (a): EtherCAT node address (Set a single-byte number within
the node address range of the CPU Unit that can be set.)
(a)
NX-ECC203
Precautions for Correct Use
To import EtherCAT slaves, you need to set this as follows.
• Place the EtherCAT slaves in the Schematic single-line page.
• Set the node addresses so that they do not conflict with other slaves.
3 Setting EPLAN Electric P8
3-9
Sysmac Studio Electrical CAD Connector Function Practices Guide for AutomationML Import (EPLAN Electric P8) (P156)
3-3 Setting the Project
3
3-3-2
EtherCA
T Slaves