Omron SYSMAC-SE2, Руководство по практике

Страница: 35 / 54

What to do Description Reference
Creating a new project Create a new project with the target
CPU Unit model and version. Refer to the Sysmac Studio Version
1 Operation Manual (Cat. No.
W504)
.
Importing the AML file Import the controller configuration
and device variables using the con-
troller configuration and device vari-
able import function.
Performing the Configura-
tions and Setup and pro-
gramming Start designing the control system.
2-3-2 Correcting Device Variable Assignments
Perform the following procedure after completing Creating a Project .
1
Correct device variable assignments in EPLAN Electric P8.
What to do Description Reference
Correcting the project Correct device variable assign-
ments in the electrical drawing
project. (For example, swap the de-
vice variables assigned to two I/O
terminals.) Section 3 Setting EPLAN Electric
P8
on page 3-1
2
Export the controller configuration and device variables from EPLAN Electric P8 to an AML file.
What to do Description Reference
Exporting the AML file Export the AML file used for the
connector function. 3-4 Setting the AML File Export on
page 3-15
3
Import the AML file to the Sysmac Studio.
What to do Description Reference
Importing the AML file Changes in device variables will be
merged through importing device
variables. Refer to the Sysmac Studio Version
1 Operation Manual (Cat. No.
W504)
.
Checking the program Check if the changed device varia-
ble assignments have any impact
on the program.
2-3-3
Correcting Device Variable Comments
Perform the following procedure after completing Creating a Project .
1
Correct device variable comments in EPLAN Electric P8.
What to do Description Reference
Correcting the project Change device variable comments
in the electrical drawing project. Section 3 Setting EPLAN Electric
P8
on page 3-1
2
Export the controller configuration and device variables from EPLAN Electric P8 to an AML file.
2 Target Data and Preconditions for the Sysmac Studio/EPLAN Electric P8 Connector Function
2-11
Sysmac Studio Electrical CAD Connector Function Practices Guide for AutomationML Import (EPLAN Electric P8) (P156)
2-3 Flow of Development with the Sysmac Stu-
dio/EPLAN
Electric
P8
Connector
Function
2
2-3-2
Correcting Device V
ariable Assignments