Omron SYSMAC CXONE-ALC-EV2 Series, Руководство по эксплуатации

Страница: 24 / 55

7
System Configuration
Section 1-3
1-3 System Configuration
1-3-1 Inverter Connection
Connection type Direct serial connection PLC Serial Communications Board/
Unit connection
Connection name Direct Via PLC (SCU/SCB)
Configuration
Required
devices 3G3JV 3G3IV-PWV103 Computer-Inverter Connecting
Cable and 3G3JV-PSI232JC RS-232C
Communications Unit 3G3JV-PSI485J
RS-422/485
Communications Unit CS/CJ-series Serial
Communications
Board/Unit Ver. 1.2 or
later.
Note The Serial
Gateway Mode is
used as the serial
communications
mode for the RS-
422A/485 port.
3G3MV 3G3IV-PWV103
Computer-Inverter
Connecting Cable Remove the Digital
Operator from the
Inverter and connect
the cable to the Digital
Operator connector. RS-422/485
communications are
built into the Inverter.
3G3RV
(includ-
ing ver-
sion-1
mod-
els)
3G3IV-PWV103
Computer-Inverter
Connecting Cable RS-422/485
communications are
built into the Inverter.
CX-Drive
Digital Operator
connector
Computer-Inverter Connecting
Cable (3G3IV-PWV103)
(D-Sub 9-pin to Inverter
Digital Operator connector)
Inverter
Modbus-RTU
RS-232C
Detach Digital
Operator.
RS-422A/485
Inverter
CS/CJ-series
PLC
CS/CJ-serial Serial
Communications
Board/ Unit Ver.1.2
or later
Modbus-RTU
Peripheral port or
RS-232C port
For Peripheral Port:
CS1W-CN226 (2 m) or
CS1W-CN626 (6 m)
For RS-232C Port:
XW2Z-200S-CV (2 m) or
XW2Z-500S-CV (5 m)
Or via network
RS-232C
CX-Drive
Connection type PLC DeviceNet connection (via DeviceNet Unit)
Connection name Via PLC (DeviceNet)
Configurations
Required
devices 3G3JV ---
3G3MV 3G3MV-PDRT2 DeviceNet Communications Unit
3G3RV 3G3RV-PDRT2 DeviceNet Communications Card
CX-Drive
CS/CJ-series
PLC
Inverter
For Peripheral Port:
CS1W-CN226 (2 m) or
CS1W-CN626 (6 m)
For RS-232C Port:
XW2Z-200S-CV (2 m) or
XW2Z-500S-CV (5 m)
Or via network
DeviceNet
Peripheral port
Or RS-232C port
CS/CJ-series
DeviceNet Unit