Omron SYSMAC CXONE-ALC-EV2 Series, Руководство по эксплуатации

Страница: 38 / 55

21
Creating New Drive Files
Section 2-2
Network Settings
Click the
Settings...
Button to the right of the Connection Type Field.
The following dialog box will be displayed.
Detailed Settings for Direct Connections
Via PLC (SCU/SCB) Connections (Except R88D-WN)
Item Network Tab Page Drive Tab Page
Dialog
box
Inverter • Slave Unit Address: 1 to 32 (Modbus-RTU slave
address) (See note 1.)
• Communications Timeout: 500 to 5,000 ms
• Number of retries: 1 to 6
• Port Selection: COM1, COM2, etc.
• Baud Rate: 2400, 9600, 19200, or 38400 bits/s
• Parity: None, Odd, or Even
• Data bits: 7 or 8
• Stop bits: 1 or 2
Servo • Slave Unit Address: 0 to F (Servo Drive commu-
nications Unit No.) (See note 2.)
• Communications Timeout: 500 to 5,000 ms
• Number of retries: 1 to 6
• Port Selection: COM1, COM2, etc.
• Baud Rate: 9600 or 19200 bits/s
• Parity: None, Odd, or Even
• Data bits: 7 or 8
• Stop bits: 1 or 2
Item Network Tab Page Gateway PLC Tab Page
Dialog
box
Inverter • Slave Unit Address: 1 to 32 (Modbus-RTU slave
address) (See note 1.)
• Master Unit Address: 0 to 15 (Unit address for
Serial Communications Unit).
Or select
CS-Series Inner Board Option (Serial
Communications Board).
• Port Selection: Port 1 or Port 2
Click the Properties Button to set the PLC (with a
Serial Communications Unit/Board) to use as the
gateway.
Servo • Slave Unit Address: 0 to F (Servo Communica-
tions Unit No.) (See note 2.)
• Master Unit Address: 0 to 15 (Unit Address for
Serial Communications Unit).
Or select
CS-Series Inner Board Option (Serial
Communications Board).
• Port Selection: Port 1 or Port 2