No.13S080-10
13
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
2.3.2 Power/IO connector:
HR10A-7R-6PB (Hirose) or equivalent.
This connector is for 12Vdc power input and the input and output signals.
The trigger input and sync input /output signals can be assigned through the
camera setting communication.
Pin assignment
(Note 1)
Trigger input signal can be assigned either on Camera Link connector (CC1) or on the No. 2 pin of the
power/IO connector through the camera setting communication.
As for the actual setting of hardware trigger, please refer to
0.
エラー
!
参照元が見つかりません。
LowVoltage
HighVoltage
1
GND
IN
2
SP-4
IN/OUT
IN
0 ~ +0.99V
+2.3 ~ +5.0V
OUT
0V
+3.3V
3
SP-3
IN/OUT
IN
0 ~ +0.99V
+2.3 ~ +5.0V
OUT
0V
+3.3V
4
SP-2
IN/OUT
IN
0 ~ +0.99V
+2.3 ~ +5.0V
OUT
0V
+3.3V
5
SP-1
IN/OUT
IN
0 ~ +0.99V
+2.3 ~ +5.0V
OUT
0V
+3.3V
6
+12Vdc
IN
+12Vdc
0V
Pin No
Signal Name
IN/OUT
Voltage
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.