No.13S080-10
69
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
Command No.
Command Description
4CH:
H_START
[7..0]
4DH:
H_START
[15..8]
[The horizontal effective pixels of changeable DVAL]
Sets the horizontal start position of the changeable DVAL.
When the horizontal effective pixels is larger than full horizontal pixel number,
The horizontal start position sets as 0 automatically.
4DH.D7
LVAL selection
0: Continuous (Horizontal equals DVAL),
1: Continuous (Full horizontal)
56H:
KN1P[7..0]
[Knee1 prameter] Initial data: KN1P[7..0] = 1
Sets the exposure time for the electronic shutter for the knee1 point, as for the exposure time.
Knee1 exposure = EXPTA[23..0] x 129 x (1 CLK cycle) x KN1P[7..0] / 100
57H:
KN2P[7..0]
[Knee2 prameter] Initial data: KN2P[7..0] = 1
Sets the exposure time for the electronic shutter for the knee2 point, as for the exposure time.
Knee1 exposure = EXPTA[23..0] x 129 x (1 CLK cycle) x KN2P[7..0] / 100
5BH:
Vlow2[7..0]
[Vlow2 voltage] Initial data: 96, data range: 0 to 255
Sets the Vlow2 voltage for the HDR saturation level voltage.
5FH:
Vlow3[7..0]
[Vlow3 voltage] Initial data: 96, data range: 0 to 255
Sets the Vlow3 voltage for the HDR saturation level voltage.
68H:
[7..0]
[Reverse mode] Initial data: 0
Sets the image output direction.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D6:
No Function
Always set as “00”
D5:
Vertical mirror image
0: Normal image
1: Vertical mirror image
D4:
Horizontal mirror image
0: Normal image
1:Horizontal mirror image
D3 to D0:
No Function
Always set as “0000”
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.