No.13S080-10
7
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
2. Specifications
2.1. Electronic specifications / Mechanical specifications / Environmental specifications
2.1.1. STC-
CMB200PCL
(2Meg, Monochrome) / STC-
CMB200PCL
-NIR (2Meg, Near IR) / STC-
CMC200PCL
(2Meg,
Color)
*1: Binning support on 8,10bit
Product
STC-CMC200PCL
STC-CMB200PCL
Electro
nic
specific
ations
Imager
2/3" Meg color progressive CMOS
(CMOSIS: CMV2000)
2/3" Meg monochrome progressive CMOS
(CMOSIS: CMV2000)
Active picture elements
2048 (H) x 1088 (V)
Chip size
11.264×5.984 mm
Cell size
5.5 (H) x 5.5 (V) µm
Scanning system
Progressive
Scanning method
Full scanning, Variable ROI
Full scanning, Variable ROI
Binning scanning,
Binning variable ROI *1
Pixel frequency of the
sensor
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
10.625MHz (2,048 x 1,088), 21.250MHz (1,024 x 1,088),
42.500MHz ( 512 x 1,088)
21.250MHz (2,048 x 1,088), 42.500MHz (1,024 x 1,088)
42.500MHz (2,048 x 1,088)
48.000MHz (2,040 x 1,088)
Frame rate
Vertical frequency of
the Camera Link output
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
73.8fps (2,048 x 1,088),147.6fps (1,024 x 1,088),295.1fps (512 x 1,088)
147.6fps (2,048 x 1,088), 295.1fps (1,024 x 1,088)
295.1fps (2,048 x 1,088)
333.3fps (2,040 x 1,088)
Horizontal frequency of
the Camera Link output
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
82kHz (2,048 x 1,088), 164kHz (1,024 x 1,088), 329kHz (512 x 1,088)
164kHz (2,048 x 1,088), 329kHz (1,024 x 1,088)
329kHz (2,048 x 1,088)
372kHz (2,040 x 1,088)
Pixel frequency o
the Camera Link output
1X2-1Y
1X4-1Y
1X8-1Y
1X10-1Y
(8bit/10bit):
(8bit/10bit):
(8bit):
(8bit):
85MHz/42.5MHz
85MHz/42.5MHz
85MHz/42.5MHz
85MHz/42.5MHz
Noise level (8bit output)
Less than 3 Digit (Gain 0 dB)
Dynamicrange
60 dB
Minimum scene illumination
*Near IR model (-NIR)
2 Lux at F1.2
1 Lux at F1.2
-
TBD Lux at F1.2
Sync. System
Internal
Video
output
'@8bit output
10TAP / FULL / MIDEUM / BASE configuration
'@10bit output
MIDEUM / BASE configuration
Shutter speed
45 seconds to 21u seconds (Variable at line), from 22 u seconds (Variable at usec)
Digital gain
1x to 5x
Gamma
1.0
Po
wer
Input voltage
12Vdc ± 10% (PoCL or Power/IO connector)
Less than 3.0 W
Consumption
Operation mode
Free-run, Edge preset trigger (V-reset), Pulse width trigger (V-reset)
Communication
RS232 via Camera Link connector
Mechan
ical
specific
ations
Dimensions
40 (W) x 40 (H) x 40.5 (D) mm (Excluding the connector)
Optical filter
No IR cut filter
Material
Aluminum (AC)
Lens mount
C mount
Interface connector
Camera Link connector: SDR connector x 2
Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
Weight
Approximately 90 g
Environ
mental
specific
ations
Operational temperature
-5 to 40 deg. C
Storage temperature
-30 to 65 deg. C
Vibration
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each)
Shock
Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3times each
Standard compliancy
EMS: EN61000-6-2, EMI: EN55011 (Class A)
RoHS
RoHS compliance
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.