No.13S080-10
77
STC-CMB200PCL / STC-CMC200PCL / STC-CMB401PCL / STC-CMC401PCL
Specifications and Users guide
7.4.3 The camera commands list (Device Code
:
3AH)
Note. 1: The data unit of the each command is 1byte (8bit).
Note. 2: The data can be saved to the EEPROM if “x” in the “Save to EEPROM” column in the list.
Note. 3: The camera is operating with the data of the EEPROM when the power on the camera.
Pixel Defect Correction(PDC)
Maximum 64points can be corrected.
When defect pixels were found in the factory, these defect pixels were corrected before shipping.
This function can be control through Pixel defect correction mode(DEH,DFH).
2M: STC-CMB200PCL,STC-CMC200PCL
4M: STC-CMB401PCL,STC-CMC401PCL
Command No.
R/W EEPROM Function
Initial Data
Data Range
00H
R/W
○
PDC Horizontal coordinate 1 (16bit
:
D[7..0])
FFFFh
0 to 2,047
01H
R/W
○
PDC Horizontal coordinate 1 (16bit
:
D[15..8])
(PDC OFF)
02H
R/W
○
PDC Horizontal coordinate 1 (16bit
:
D[7..0])
FFFFh
2M:0 to 1,087
03H
R/W
○
PDC Horizontal coordinate 1 (16bit
:
D[15..8])
(PDC OFF)
4M:0 to 2,047
04H
R/W
○
PDC Horizontal coordinate 2 (16bit
:
D[7..0])
FFFFh
0 to 2,047
05H
R/W
○
PDC Horizontal coordinate 2 (16bit
:
D[15..8])
(PDC OFF)
06H
R/W
○
PDC Horizontal coordinate 2 (16bit
:
D[7..0])
FFFFh
2M:0 to 1,087
07H
R/W
○
PDC Horizontal coordinate 2 (16bit
:
D[15..8])
(PDC OFF)
4M:0 to 2,047
●
●
●
●
FCH
R/W
○
PDC Horizontal coordinate 64 (16bit
:
D[7..0])
FFFFh
0 to 2,047
FDH
R/W
○
PDC Horizontal coordinate 64(16bit
:
D[15..8])
(PDC OFF)
FEH
R/W
○
PDC Horizontal coordinate 64 (16bit
:
D[7..0])
FFFFh
2M:0 to 1,087
FFH
R/W
○
PDC Horizontal coordinate 64 (16bit
:
D[15..8])
(PDC OFF)
4M:0 to 2,047
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
Aegis
Electronic
Group,
Inc.