![background image](http://html1.mh-extra.com/html/omron/r88m-k-series/r88m-k-series_startup-manual_742246019.webp)
19
3
In the Master tab page, specify a
communication period for
Cycle
Time [us]
.
* You must specify the
communication period in
accordance with the servo
frequency of the Controller.
1000 us is set in this document.
Correspondence between the servo frequencies of the
Controller and communication periods is as follows:
4 kHz : 250 us
2 kHz : 500 us
1 kHz : 1000 us
4
Select
System
–
EtherCAT
in
the Solution Explorer and
right-click on
Master0
(Deactivated)
, then select
Scan
EtherCAT Network
.
5
Make sure that the slave is
displayed in the Solution
Explorer.
Содержание R88M-K Series
Страница 11: ...11 6 5 2 Motor Setup 6 5 3 Creation of Operation Check Programs 6 5 4 Project Data Transfer and Operation Check...
Страница 13: ...13 5 From the File menu select New then Project 6 Enter a project name and location and select OK...
Страница 46: ...46 10 Revision History Revision code Revised date Revised content A 5 Apr 2019 First edition...
Страница 47: ...2019 0419 0419 O038 E1 01 Note Do not use this document to operate the Unit...