40
10
Saving the downloaded settings
and programs
After the download process is
complete and you make sure
that there are no errors in the
Output Window, run the save
command from the Terminal tab
page.
* The save command stores the
downloaded project in the
Controller. This operation saves
the settings to be executed
automatically when the power to
the Controller is turned on.
11
Restarting after download
Run the following command
from the Terminal tab page to
restart the Controller with the
downloaded project.
$$$
Содержание R88M-K Series
Страница 11: ...11 6 5 2 Motor Setup 6 5 3 Creation of Operation Check Programs 6 5 4 Project Data Transfer and Operation Check...
Страница 13: ...13 5 From the File menu select New then Project 6 Enter a project name and location and select OK...
Страница 46: ...46 10 Revision History Revision code Revised date Revised content A 5 Apr 2019 First edition...
Страница 47: ...2019 0419 0419 O038 E1 01 Note Do not use this document to operate the Unit...
