Omron fz5 series, Руководство по установке оборудования

Страница: 26 / 286

Regulations and Standards
24 Vision System FZ5 series Hardware Setup Manual (Z423)
The FH-1000/2000/3000/5000 series Sensor Controller is compliant with the standards below:
• EC Directive 2004/108/EC (Until April 19 2016) / EU Directive 2014/30/EU (After April 20 2016)
EN61326-1
Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
• Also, the following condition is applied to the immunity test of this product.
• If the level of disturbance of the video is such that characters on the monitor are readable, the test
is a pass.
• This product complies with EC/EU Directives. EMC-related performance of the OMRON devices that
comply with EC/EU Directives will vary depending on the configuration, wiring, and other conditions
of the equipment or control panel on which the OMRON devices are installed.
• The customer must, therefore, perform the final check to confirm that devices and the overall
machine conform to EMC standards.
• If there is a need to respond to the EC / EU directive, please use by an analog RGB output.
This regulation applies to FH-1000 and FH-3000 series Sensor Controller and peripheral devices.
This product complies with UL Standards.
• UL508
This regulation applies to FH-2000 and FH-5000 series Sensor Controller and peripheral devices.
This product complies with UL Standards.
• UL61010-2-201
FH-1000/2000/3000/5000 Series
Conformance to EC/EU Directives
Conformance to UL Standards