![background image](http://html1.mh-extra.com/html/omron/fz5-series/fz5-series_hardware-setup-manual_742694193.webp)
5 - 23
5 Setup and Wiring
Vision System FZ5 series Hardware Setup Manual (Z423)
5-3
Senso
r C
o
n
troller In
stallation
5
5-
3-4 F
Z5 Ser
ies
Precautions for Safe Use
Power Supply and Wiring
• Never connect AC power to this product. Connecting an AC power source may cause a mal-
function.
• The recommended power supply is S8VS-
24 (made by OMRON) or S8VK-G-
24
(made by OMRON).
• Keep the power supply wires as short as possible (Max.10 m).
• Use the cables and crimping terminals with the specified dimensions.
Do not directly connect an electric wire to the terminal lock that is simply twisted.
• Recommended wire size: AWG16 to 13 (1.31 to 2.63 mm
2
)
• Terminal screw: M4 (Tightening torque: 1.4 N·m)
• Crimping Terminal
• After wiring, replace the terminal cover.
Ground
• The controller power circuit is not insulated from its internal circuit.
• When grounding the 24 V DC power supply’ s positive terminal, do not ground the controller’
s FG terminal or the PLC’ s FG terminal. [
,
] Since the PC’ s shell and the SG (0 V) are
connected inside the PC, current would run through the route shown in the figure below and
cause burnout.
• As in the case with a PC, you can safely ground the controller’ s FG terminal without a prob-
lem when there is no possibility that the SG (0 V) and the FG will short-circuit. For information
about the PLC wiring, check the specifications of your PLC before wiring.
• Be sure to use a pedestal when connecting a camera to the controller. [
] As the shell of the
camera is the SG (0 V), it can cause short-circuiting between the SG (0 V) and the FG if a
pedestal is not used.
• To avoid receiving an electric shock when grounding a positive terminal, do not touch the SG
(0 V) (camera, power supply terminal).
5-3-4
FZ5 Series
8.5 mm max.
8.5 mm max.
1
2
3
SG (0 V)
0V
SG
SG
24 V
SG
SG
FG
FG
FG
RS-232C
RS-232C
SG
SG
SG
FG
FG
PLC
FG
Power
supply
Controller
Camera cable
SG (0 V)
Camera
Mounting Spacer
(insulator)
Power supply
circuit
PC
Shell
Parallel I/O
connectorʼs
shell
RS-232C
connector
ʼ
s shell
SG: Signal Ground
FG: Frame Ground
Содержание fz5 series
Страница 8: ...Manual Structure 6 Vision System FZ5 series Hardware Setup Manual Z423...
Страница 50: ...1 Confirm the Package 1 14 Vision System FZ5 series Hardware Setup Manual Z423...
Страница 162: ...3 Configuration 3 100 Vision System FZ5 series Hardware Setup Manual Z423...
Страница 285: ......