81
3-3. Print Default Settings
Report Type
The report type can be set for the patient report and trend report. Refer to the examples starting on
page 54. Configure the settings in accordance with your examination policies, including the print
conditions and report layout.
■
Standard Report
This report is for the doctor. There is one type.
■
Patient Report
There are four types. For No.1, No.2, and No.4 (No.4 is for the optional HMC package), one of two
layouts can be selected.
Refer to "Patient Report" (page 60).
* No. 4 is only enabled when the optional HMC package is used. For details, see the manual for the HMC package.
■
Trend Reports
Refer to "Trend Report" (page 64).
* This is only enabled when the optional HMC package is used. For details, see the manual for the HMC package.
Selections
Description
NO.1
This type shows measured values, graphs, and images in a uniform
arrangement.
NO.2
This type focuses on arterial stiffness and arterial stenosis in graph format.
NO.3
This type shows the risk of cardiovascular disease using easy-to-
understand illustrations.
NO.4*
This type is for the optional HMC package.
Selections
Description
STANDARD
This type shows measurement data trends based on comparison with past
data.
HMC*
This type is for the optional HMC package.
BP-203RPE3(A).fm 81 ページ
9年
月
6日 土曜日 午後5時4
分
Содержание Colin BP-203RPE III
Страница 2: ...BP 203RPE3 A fm 0 ページ 9年 月 6日 土曜日 午後5時4 分 ...
Страница 57: ...55 2 3 Measurement Results Standard Report go to next page BP 203RPE3 A fm 55 ページ 9年 月 6日 土曜日 午後5時4 分 ...
Страница 150: ...148 Memo BP 203RPE3 A fm 148 ページ 9年 月 6日 土曜日 午後5時4 分 ...
Страница 151: ...BP 203RPE3 A fm 149 ページ 9年 月 6日 土曜日 午後5時4 分 ...