Omron CK3M Series, Руководство пользователя по оборудованию

Страница: 228 / 288


AbortAll
Register name Sys.AbortAll
Description Stop by Abort all input
Range 0 to 1
Details 0: No stop by Abort all input
1: Stopped by Abort all input, or stopped in the past by Abort all input.
Detection timing With Abort all input
Recovery Cycle the power supply, or issue reset command ($$$)
Effects Operation continues
Cause and cor-
rection Cause (Assumed cause) Correction Prevention
Abort all was input. None None
Precautions/
Remarks None

NoClocks
Register name Sys.NoClocks
Description Cannot detect a phase clock or a servo clock.
Range 0 to 1
Details 0: No error
1: Cannot detect a phase clock or a servo clock.
Detection timing When power is turned ON or the Controller is reset.
Recovery Cycle the power supply, or issue reset command ($$$)
Effects Cannot enable the motor.
Cause and cor-
rection Cause (Assumed cause) Correction Prevention
The clock-related register is
overwritten by the user pro-
gram. If the error no longer occurs
after the re-initialization
command ($$$***) is exe-
cuted, review the user pro-
gram. None
A Unit that supplies servo
clock and phase clock sig-
nals is installed to the Ex-
pansion Rack. Install the Unit that supplies
clock signals to the CPU
Rack. None
The CPU Unit or the CK3W
Unit has failed If this error persists even
after you make the above
corrections, replace the
CPU Unit or the CK3W
Unit. None
Precautions/
Remarks None
6 Troubleshooting
6-14
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)