Omron CJ1W-FLN22, Руководство по эксплуатации, Страница: 196 / 277

Operating Procedures Section 11-2
170
CX-FLnet Operating
Procedure
Note 1. The new settings go into effect when the PLC's power is turned ON again
or when the FL-net Unit is restarted.
2. Confirm that the communications settings are correct for the environment
in which they are to be used.
11-2 Operating Procedures
11-2-1 Starting
There are two methods of starting CX-FLnet.
Starting from the Start Menu
1,2,3... 1. Click the Start Button.
2. Select Program - OMRON - CX-One - CX-FLnet .
Starting from the CX-Programmer
1,2,3... 1. Click the I/O tables in the Project Workspace Window in the CX-Program-
mer.
2. Add an FL-net Unit to the I/O tables. (If the CX-Programmer is online to the
PLC, transfer the I/O tables from the PLC to the computer.)
3. Right-click the FL-net Unit and select Start Special Application from the
pop-up menu.
Make communications settings.
↓
Unit settings
↓
Monitoring
System settings
Make settings in CPU Bus Unit Setup Area.
Select monitor function.
System settings
Make local node settings.
System settings
Make other node settings.
Check display contents.
Transfer settings. Close monitor screens.
Turn PLC power ON or restart the FL-net Unit.
Begin FL-net Unit operation.
Confirm that operation is normal, and then save
the settings.
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
CX-FLnet installation (Setup will also be performed if CX-One is installed.)
Exit the CX-FLnet.
Click the Update Button
to update the display if required.
Display monitor screens.
System settings: Make expansion settings
(data transfer sequence) when required.
Exit the CX-FLnet.