manualshive.com logo in svg

Omron C200HE-CPU -Z Series, Руководство по установке

Поделиться
Скачать
Omron C200HE-CPU -Z Series Скачать руководство пользователя страница 55

40

2-4-3 Link Systems and Networks

The C200HX/C200HG/C200HE can be included in an expanded system config-
uration including a Host Link System (SYSMAC WAY), a PC Link System, Opti-
cal or Wired Remote I/O Systems (SYSMAC BUS), CompoBus/S, DeviceNet,
SYSMAC NET Link or SYSMAC LINK System. All of these can be used in com-
mon with the C200HX/C200HG/C200HE. In addition, the following Unit can be
connected: B7A Interface Unit. Specifications for all of these Units are provided
in Appendix B Specifications.

SYSMAC LINK Systems

OMRON’s SYSMAC LINK System is a communications network that connects
up to 62 nodes to provide data links, data transfers, and datagram services.

SYSMAC LINK Unit
C200HW-SLK13/SLK14
(optical)
C200HW-SLK23/SLK24
(coaxial cable)

CPU Unit

SYSMAC-series PC

•

Data links provide automatic transfer of up to 2,966 words of data in the LR
and/or DM Areas.

•

Data transfers of up to 256 words each can be implemented by programming
the NETWORK READ (RECV(98)) and NETWORK WRITE (SEND(90))
instructions in the user program.

•

Data transfers via datagrams are also available using a command/response
format.

•

A C200HW-COM01 or C200HW-COM04-E Communications Board and a
C200HW-CE001 or C200HW-CE002 Bus Connection Unit are required to use
a SYSMAC LINK Unit.

The C200H-APS03 Auxiliary Power Supply Unit is used as a backup power sup-
ply for optical SYSMAC LINK Systems.

Expanded System Configurations

Section 2-4

Содержание C200HE-CPU -Z Series






























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды