31
In the following cases, the set value blinks for 3 s and the data
before changing is returned.
•
When a value exceeding the setting range is set
•
Set values of constants No. 32 and No. 33 are not in descending
order.
•
If the following conditions are not satisfied in the V/f constant set-
ting:
Maximum frequency (No. 02)
≥
Base frequency (No. 04) >
Intermediate frequency (No. 05)
≥
Minimum output frequency
(No. 07).
For the following setting, intermediate frequency voltage (No.
6) is disregarded:
Intermediate frequency = Minimum frequency.
For details, refer to
2-8-3 V/f Characteristic Setting.
•
If the following condition is not satisfied in the frequency refer-
ence constant setting:
Set frequency reference (Nos. 13 to 17)
≤
Maximum frequency
(No. 2)
For details, refer to
2-8-3 V/f Characteristic Setting.
•
If the following condition is not satisfied in the frequency refer-
ence upper/lower limit value setting:
Frequency reference lower limit value (No. 25)
≤
frequency ref-
erence upper limit value (No. 24).
2-3
Digital Operator Operation Example
The following shows an example of Digital Operator operation.
Operation Pattern
FWD jog
operation
Select
FWD. RUN
Change
setting value
Select
REV.
RUN
Freq. setting
Power
supply on
STOP
FWD. RUN
15 Hz
FWD. RUN
60 Hz
REV. 60 Hz
Precautions on
Constant Setting
Digital Operator Operation Example
Section 2-3
