22
Inverter Model
3G3XV-
-EV2
A2037
A2022
A2015
A2007
A2004
A2002
A2001
3-phase
Inverter Model
3G3XV-
-EV2
AB037
AB022
AB015
AB007
AB004
AB002
AB001
Single-phase
Operation
di i
Input
i
l
Operation signal
Forward operation/reverse operation by individual command
conditions
signals
Reset
Releases protection while the function is operating.
Multifunction set-
ting
Possible to set 4 speeds max.
Multifunction input
selection
Multifunction contact input: two of the following signals avail-
able to select.
Multispeed command, jog operation, accel/decel time select,
3 wire sequence, external coasting stop, speed search, exter-
nal fault, External fault.
Output
signals
Operation state
(photo-coupler
output)
Multifunction contact output: two of the following signals avail-
able to select.
During running output, zero speed, frequency agree, output
frequency
≥
setting value, during overtorque detection
Fault contact
NO/NC contact output
Built-in function
The following set-up is available: frequency reference bias/
gain, upper/lower frequency limit, DC braking stop current at
start, s-curve characteristics, torque boost, frequency meter
calibrating gain, auto reset/restart operation, frequency jump.
Monitor
display
function
Digital Operator
Displays setting frequency, output frequency, output current,
rotating direction, and the contents at protective function
operation.
Analog output
monitor
Analog output (0 to 10 VDC). Possible to select output fre-
quency or output current.
Protective configuration
Enclosed wall-mounted type NEMA 1
(An open chassis type is also available.)
Cooling method
3-phase
Self-cooling
Forced cooling
g
Single-phase
Self-cooling
Forced cooling
Weight in lb
(
i k )
3-phase
2.4 (1.1)
4.4 (2)
6.6 (3)
g
(mass in kg)
Single-phase
4.4 (2)
6.6 (3)
11.0 (5)
Environmen-
l C
di i
Location
Indoor (protected from corrosive gases and dust)
tal Conditions Ambient temperature
+14
°
to 104
°
F (–10
°
to +40
°
C) (not frozen)
Storage temperature
2
–4
°
to 140
°
F (–20
°
to +60
°
C)
Humidity
90% RH (without condensation)
Vibration
Up to 9.8 m/s
2
(1 g) at less than 20 Hz.
Up to 2 m/s
2
(0.2 g) at 20 to 50 Hz.
Note
1. Use a standard 4-pole motor for maximum applicable motor
output.
2. Temperature during shipping (for short period).
Specifications
Section 1-6
