Omnitronix Data-Link DL100 Скачать руководство пользователя страница 24

Страница: 24 / 59

Omnitronix DL100 User’s Manual

Page 22

Data-Link DL100 - FTP Push Setup Menu

A) FTP Push Enable [OFF]

B) FTP Server Address [0.0.0.0]

C) Username [Default FTP Username]

D) Password []

E) Account []

F) Directory []

G) Minutes Between Push Attempts [1440]

H) Select Files to Push

I) Remote File Names

FTP Push Setup: FTP Push Enable

is an on/off toggle for FTP push.

FTP Push Setup: FTP Server Address

is the IP address of the FTP server to push to.

FTP Push Setup: Username/Password

are the username and password settings for accessing the

remote FTP server.

FTP Push Setup: Account

is a third login option used only on some FTP servers. Consult the

network administrator to see if this is necessary.

FTP Push Setup: Directory

is the path used to upload the file(s). Leaving this option blank

uploads the files into the root login directory.

FTP Push Setup: Minutes Between Push Attempts

has a valid range of 1 to 9999 minutes.

FTP Push Setup: Select Files to Push

brings up the menu in the following example. Each item

in the menu is a toggle for the specified file.

Data-Link DL100 - FTP File Selection

A) Data File 1 [ON]

B) Data File 2 [ON]

C) Data File 3 [ON]

D) Data File 4 [ON]

E) Alarm File [ON]

FTP Push Setup: Remote File Names

brings up the menu in the following example. Each item

in the menu allows the admin to set the new remote file name for uploaded files.

Data-Link DL100 - FTP File Names

A) Data File 1 [FILE1]

B) Data File 2 [FILE2]

C) Data File 3 [FILE3]

D) Data File 4 [FILE4]

E) Alarm File [ALARM]

FTP Autodelete

automatically deletes records that are retrieved via the internal FTP server. This

function has no effect on FTP push operations, which always have autodelete enabled.

Содержание Data-Link DL100




























































Результаты поиска

Содержание Data-Link DL100

Отзывы:

Похожие инструкции для Data-Link DL100

Бренды по названию

Популярные бренды

Omnitronix Data-Link DL100, Руководство пользователя

Результаты поиска

Содержание Data-Link DL100

Отзывы:

Похожие инструкции для Data-Link DL100

Бренды по названию

Популярные бренды