background image

Omnitronix DL100 User’s Manual 

Page 32 

 

 

Data-Link DL100 - 80% Full Alarm Settings 

A) Alarm Enable                        [OFF] 

B) Alarm Actions                       [] 

C) Alarm Message                       [80% Full] 

 

80% Full Alarm Settings:  Alarm Enable

 toggles the alarm on and off. 

80% Full Alarm Settings:  Alarm Actions 

defines the actions to perform on alarm. 

80% Full Alarm Settings:  Alarm Message

 is the string sent with trap actions. 

Scheduled Event 

n

 Settings

 contains all of the settings for actions to occur on a regular, 

predetermined basis. 

 

Data-Link DL100 - Scheduled Event 1 Setup 

A) Enable Event                        [OFF] 

B) Event Actions                       [] 

C) Event Message                       [Event 1 Default Message] 

D) Event Time Sunday                   [DISABLED] 

E) Event Time Monday                   [DISABLED] 

F) Event Time Tuesday                  [DISABLED] 

G) Event Time Wednesday                [DISABLED] 

H) Event Time Thursday                 [DISABLED] 

I) Event Time Friday                   [DISABLED] 

J) Event Time Saturday                 [DISABLED] 

K) Add Exclusion 

L) Delete Exclusion 

    [] 

 

Scheduled Event 

n

 Settings:  Enable Event

 toggles the event on or off. 

Scheduled Event 

n

 Settings:  Event Actions 

defines the actions to perform on event. 

Scheduled Event 

n

 Settings:  Event Message

 is the string sent with trap actions. 

Scheduled Event 

n

 Settings:  Event Time 

Day of Week

 

sets the time to perform the action on 

each day of the week.  These settings accept either a <SPACE> + <ENTER> to disable the event, 
or a time in HH:MM 24-hour format.

 

Scheduled Event 

n

 Settings:  Add Exclusion

 allows an administrator to add certain dates to 

prevent scheduled events from occurring.  After a MM/DD entry is made, it appears in the 
brackets below option O. 

Scheduled Event 

n

 Settings:  Delete Exclusion

 prompts for a date to delete.  Upon entering a 

date used in the exclusion list, it will be removed. 

Содержание Data-Link DL100




























































Отзывы: