Omnitronix Data-Link DL100, Руководство пользователя

Страница: 35 / 59

Chapter 4 - Setup
Manual Rev. 1.02 Page 33
4.7 - Action Definitions
This menu contains all of the settings for modem callouts and pager actions. A modem action is
where the DL100 calls the specified number and offers a command session. In a pager action, the
unit dials a numeric or alphanumeric pager and sends a message indicating an alarm has occurred.
Data-Link DL100 - Actions Definition Menu
A) Callout Attempts [5]
B) Callout Delay (seconds) [60]
C) Modem Callout Number 1 []
D) Modem Callout Number 2 []
E) Modem Callout Number 3 []
F) Modem Callout Number 4 []
G) Pager Number 1 []
H) Pager Number 2 []
I) Pager Number 3 []
J) Pager Number 4 []
Callout Attempts sets the total number of times to attempt modem or pager callouts if previous
attempts fail.
Callout Delay is the number of seconds to wait between callout attempts.
Modem Callout Number n sets the phone number to call for each modem action.
Pager Number n brings up the following menu.
Data-Link DL100 - Pager 3 Settings
A) Pager Type [NUMERIC]
B) Pager Callout Number []
C) Pager ID []
D) Post Callout Delay (seconds) [15]
E) Post ID Delay (seconds) [5]
Pager Number n : Pager Type toggles between "Numeric" and "Alpha", selecting the type of
pager to call.
Pager Number n : Pager Callout Number defines the phone number for the pager.
Pager Number n : Pager ID is used only with paging systems where many pagers share the same
phone number. This is common with alphanumeric pagers.
Pager Number n : Post Callout Delay is the number of seconds the unit will wait before sending
the Pager ID.
Pager Number n : Post ID Delay is the number of seconds the unit will wait before sending any
message data.