OmniTek Ultra XR, Руководство пользователя

Страница: 4 / 184

iv XR-56-201 5 Contents 03/18
Con
ten
ts
Installation Environment
Operating Temperature
The unit should only be operated between 5 and 35°Centigrade. If the unit is operated at a higher
temperature there is a possibility of a fire hazard. If the temperature is changed rapidly from a cold
environment to a hot environment, moisture can be created internally which can cause malfunction or
damage the unit. Allow the unit to sit for 30 minutes without power applied to reduce any possibility
of condensation.
If the unit’s internal temperature rises above 87° Centigrade a warning dialogue will be displayed. If
the unit’s internal temperature rises above 99°Centigrade the unit will automatically go into safe mode
to attempt to avoid damage. Under both conditions, an event will be added to the event log to show
what happened.
Input/Output Terminals
Do not connect the input or output BNC connectors to external power as this can damage the internal
circuitry and cause the unit to work incorrectly.
The BNC connectors fitted on this unit are 75 Ω type which are not compatible with 50 Ω plugs.
The use of 50 Ω plugs will permanently damage the connectors on the unit and is considered
to be misuse of the equipment and will therefore invalidate the unit’s warranty.
When Not In Use
Disconnect the unit from the power supply and AC power source when not in use.
RoHS Compliance
Omnitek products are designed and manufactured using only RoHS compliant components and
materials. Therefore based on information provided by our suppliers, Omnitek certifies that ALL
products that it manufactures are “RoHS-5” compliant and that they do not exceed the designated
levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and
polybrominated diphenyl ether flame retardants (PBDE) legislated under the provisions of the
“European Parliament and Council Directive” on the “Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment (2011/65/EC)” and associated regulations collective
known as the “RoHS Regulations”.
Disposal of Equipment
This product is subject to the European WEEE (Waste Electrical and Electronic
Equipment) directive and should be disposed of according to the regulations of
each country.