OmniTek Ultra XR, Руководство пользователя

Страница: 131 / 184

Ultra XR User Guide 5–11 XR-56-201 5
Connections
Outputs
HDMI Output Block
The HDMI Output block
represents the physical HDMI
output connection and is used to
select the format and frame rate
of the HDMI output.
The input to this block can be connected directly from the Generator block, to allow HDMI signal
generation, but typically is connected from the User Interface block to provide the control system user
interface on an HDMI monitor.
The HDMI Output block provides the following functions:
Output Format
the HDMI output format and frame rate can be selected from the

drop down
list of frequently used formats or by selecting settings icon to define specific
formats and frame rates.
Genlock this allows the HDMI output to be locked to the unit's locking reference signal
selected in the
Genlock
block. With
Free Run
selected the HDMI will be
unlocked.
Clicking on this icon next to the currently selected output format will display the
Video Standards Editor. Clicking on the icon next to the Genlock

drop down
will display the Genlock Timing Editor .
HDMI Output Format
The HDMI output format and frame rate can be selected from
the

drop down list of frequently used formats or by selecting
settings icon to define specific formats and frame rates.
Raster
defines the image size such as 1280x720, 1920x1080, 2048x1080, 3840x2160
and 4096x2160.
Refresh
defines the frame rate and whether the format is interlaced or progressive.
Sampling defines the video sampling format this used. By default this is 10bit 4:2:2 YUV.
Set
applies the currently selected video format, frame rate and data sampling mode
to the DisplayPort output.
Close
closes the Video Standards Editor without applying or saving the changes.
HDMI Output Timing
The timing of the HDMI output can be aligned to the system's
genlock input using the Genlock Timing Editor. This allows the
HDMI output to be advanced/delayed using Pixel and Line values.
Selecting the OK button will apply any changes made.