manualshive.com logo in svg

OmniTek Ultra XR, Руководство пользователя

Поделиться
Скачать
OmniTek Ultra XR Скачать руководство пользователя страница 166

B–16

XR-56-201 5

Installation 03/18

Installation

Updating the System Software from USB

Detailed steps are typically given in the Upgrade Instructions provided with the software.

Registered users may download the individual components from the Omnitek web site http://omnitek.

tv/download.

Download or copy the ultra_#_#_##_0.omk file to the ROOT directory of a FAT or FAT32 

formatted USB memory stick.

Turn the Ultra on (if it is not already running) and call up its User Interface. The interface used 

can be either Web-based or a Local UI as you prefer.

Insert the USB memory stick in one of the USB ports on the rear panel. The following window 

should appear on the user interface

Check that the release you require is highlighted and the 

select the 

Install

 button. If you wish to cancel the install at 

this stage select the 

Close

 button.

The new software will then be copied to the Ultra. Progress messages will be displayed as the 

new version is copied to the Ultra and checked.

As a final step, the Ultra will be re-booted.

Note that the process of re-booting should take no more than five minutes. If the re-booting 

message remains on the screen for longer than this, it is possible that the network over which 

you are working has failed to reconnect your Web browser to the Ultra for some reason. If this 

happens, it is advisable to close your current Web connection to the Ultra and call it up afresh.

Содержание Ultra XR

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды