Omnisense Systems ULS-M384S, Руководство пользователя

Страница: 16 / 52

14
3.6 Connecting to your display options
You can choose to display the video output of your Ulysses Micro system to:
1. a supported MFD (refer to the latest list on the support page of our website)
2. an analog monitor
3. computer (via web browser)
3.6.1 Connecting to your MFD
1. Connect the ethernet cable from the [Controller/MFD] port in the Junction Box to your
MFD. Omnisense Systems camera system currently functions with Furuno, Garmin and
Navico’s MFD. You can check the latest supported brands and models on the support
page on our website.
2. The default settings in the User Interface (UI) is for Garmin MFD. If you are using a
Garmin’s MFD, you should see a Ulysses Micro icon on the display after powering up both
the MFD and camera system. Launch the Ulysses Micro icon to access the UI.
3. If you are using a Furuno or Navico’s MFD, you have to pair the MFD to the camera
system using a web browser or an analog monitor.
4. Connect to a web browser (see section 3.6.3). Alternatively, you can access the UI using
an analog monitor (see section 3.6.2) and the Joystick Controller.
5. Select and then
6. Select Device Access (see section 5.5.2).
7. Select on [Furuno] or [Navico] to generate a new set of IP address.
8. Select Save and Reboot.
9. Your MFD will pair to the camera system after the reboot.
1. Controller Cable
2. Camera Harness
3. Ethernet Cable
4. Power Cable
1
2
3
4
DC power supply