Omnisense Systems ULS-M384S, Руководство пользователя

Страница: 11 / 52

9
Identify a suitable location to mount your Camera Turret. Ideally, it should be installed:
• above the bridge of your vessel,
• the mast or
• a location as high as practicable that offer/or close to 360˚ unobstructed view.
Alternatively, you may decide on a location that can offer the best view that you desire.
Note that the Camera Turret can be mounted ball-up (upright) or ball-down (upside-down)
position.
Other points to consider for installation of your products include:
• The mounting surface must be horizontal.
• Choose a location as close to the vessel’s centerline as possible. This provides a
symmetrical view when looking forward or aft.
• Ensure that the Camera Turret is installed in an accessible location for periodic cleaning
(fresh-water rinse), an inspection of mounting point integrity, mechanical soundness and
preventive maintenance.
• Camera Turret mounting point should be sturdy and free from excessive vibration.
• The Camera Turret should be mounted as high as practical, but without interfering with
any radar, navigational or communications electronics.
• Omnisense Systems products conform to the appropriate Electromagnetic Compatibility
(EMC) regulations. To minimize electromagnetic interference between equipment, we
recommend that wherever possible, Ulysses Micro equipment and cables connected to it
are:
• at least 3ft (1m) from any equipment transmitting or cables carrying radio signals. e.g.
VHF radios, cables and antennas. In the case of SSB radios, the distance should be
7ft (2m).
• more than 7ft (2m) from the path of a radar beam. A radar beam can be assumed to
spread 20˚ above and below the radiating element.