Omnisense Systems ULS-M384S, Руководство пользователя

Страница: 20 / 52

18
4.3 Gyro calibration (Ulysses Micro S and S+ only)
Upon powering up/waking up from Standby mode, the system will initiate a gyro calibration
sequence. A “gyro calibrating” message will be displayed on the screen when calibration is
performed.
• If gyro-calibration is successful, a “Gyro calibration successful” message will be
displayed. Select [OK] on the dialog box to confirm.
• If gyro-calibration is unsuccessful, a “Gyro calibration unsuccessful” message will
be displayed. To perform gyro calibration again, select [Calibrate] on the dialog box.
Alternatively, you may select [Cancel] to exit the dialog box.
When the system detects that a gyro-calibration is required, a “gyro cal required” message will
be displayed on the screen.
• To perform gyro calibration, select [Start] on the dialog box.
• Alternatively, you may select [Ignore] to exit the dialog box.
OK
Gyro calibration successful.