Omnisense Systems ULS-M384S, Руководство пользователя

Страница: 18 / 52

16
1. Camera Harness
2. Ethernet Cable
3. Power Cable
1
2
3
DC power supply
3.6.3 Connecting to a laptop/desktop
1. Connect an ethernet cable (not provided) from the [Controller/MFD] in the Junction Box to
your computer.
2. On your web browser, enter the default IP address (172.16.6.225) indicated at the base of
the Camera Turret and use the following login credentials to set up the camera.
Username: admin
Password: 12345
3. Once you logged in to the User Interface (UI) on your web browser, you can control and
access the camera settings by using the mouse on your laptop/desktop.
laptop
3.7 Cable management
Cable routing must be conducted correctly to maximize the performance and shelf life of the
cables. Do not bend the cable excessively. Please ensure that a minimum bend radius of 3in
(150mm) is achieved.
Protect all cables from physical damages by using trunking or conduit where possible. Do not
run cables through bilges, doorways, hatches and hot objects.
Always route data cables as far away from other equipment and cables, high current carrying
AC/DC power lines and antennas.